Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle and height, pull back angle is adjusted on the fork stanchion clamp. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar
Availability varies on this part, check availability
£170.00
INC VAT
£141.67 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Dimensions:
For 38mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.
Sorry, this part is no longer available.
Sorry this item is out of production
Dimensions:
35mm internal diameter x 70mm tall collar, approx. 105mm reach from stanchion to headlight bolt
Pair of Tommaselli chromed headlight brackets with anti vibration rubber collars and silver finish aluminium brackets. To fit 35mm and 36mm diameter forks.
1 in stock
£57.00
INC VAT
£47.50 EX VAT
Pair of high rise adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar
Ideal for riders who wish to ride their cafe racer / sports bike in comfort, these bars have a useful 70mm rise, and can be arranged high and straight like standard handlebars, or low and mean like race clip ons, with plenty of adjustability inbetween.
Availability varies on this part, check availability
£215.00
INC VAT
£179.17 EX VAT
Stylish fibreglass Imola fairing ideal for your home built Guzzi cafe racer. Supplied unpainted and undrilled. Brackets and screen not included.
Designed to work with 750SS / 900SS screen. See CFA00076 for a screen and LIA97595 for a compatible LED headlight
This part is available by special order, request a quote
079703958
Also fits Ducati 750/900 SS & SSD
£100.40
INC VAT
£83.67 EX VAT
Tinted screen for replica fairing CFA00075. Supplied without fittings
This part is available by special order, request a quote
079703958
Also fits Ducati 750/900 SS & SSD (1972-1977)
£48.00
INC VAT
£40.00 EX VAT
Round 12v two pin flasher relay for LED indicators. For use with aftermarket LED indicators
Includes rubber for attaching to bike.
NB Only suitable for LED indicators. Will not work in modern V7 models because these do not utilise a flasher unit.
This part is available by special order, request a quote
£12.00
INC VAT
£10.00 EX VAT